Screwing in closet shelving into studs create squeaking noise??
I am installing closet shelving into my closet and in the process I need to screw the shelving into the wood studs behind the wall. I'm using ~2" manufacturer screws to do this, and it becomes very difficult to get the last 0.5" or so in using these screws; the screw head was getting worn out ... so i thought it might be cheap metal. So, I instead using about 2" drywall screws. Although the drywall screws went in without a problem, it made a squeaking noise in the last ~0.5" while doing this. Is this something to worry about? Or is there possible something behind the stud??
I do not think it is metal piping because I am installing it on a bedroom on a top floor with no bathroom nearby. Anyway, it seems like this last 0.5" is making me worry some. Anyone have any thoughts? So far, no issues have appear, but I am a little paranoid at this time. Thanks!
Not sure if it matters, I am using a cordless drill.
Related Blogs
Related posts:
- Closet Shelving – Exactly The Way You Want It Many of us fall into the trap of closet...
- Bathroom Shelving – Reflections 3-Tier Rack – BE3523 Detailed scroll insets give life to this transitional towel...
- Plywood instead of drywall–any issues I should be concerned about? I'm replacing a wall in my rear mud room and...
- Bathroom Shelving – Reflections Corner Rack – BE3524 Detailed scroll insets give life to this transitional corner shelf....
- Bathroom Shelving – Reflections Spacesaver – BE3521 Detailed scroll insets give life to this transitional spacesaver. Making...
Related posts brought to you by Yet Another Related Posts Plugin.
This is normal,if you look at the screw it is tapered.The further you drive it in the more it bites into the wood. You can try two things here,drill a hole first a little smaller than the screw diameter, or but a touch of dish washing liquid on the thread of the screws first to act as a lubricant. If you spill any easy clean-up that’s why I don’t use oil.
Not a problem, it is just the screw biting in.
You have nothing to worry about its just the friction noise between the threads and the hole you are boring,if you’re still concerned try drilling a small pilot hole first.
If you use a chrome or stainless steel screws, it will definitely bite into the wood easily. Try to use a bigger screwdriver, so that you can have a good grip and transfer the twisting action effectively to the screws.